ShinMaywa - CVC Single Phase - 65CVC41.5S - Cast Iron - Submersible Pump - 2 hp - 265 GPM @ 5ft - 32ft Cord - 230 Volts
Product Details
The ShinMaywa CVC Series 65CVC41.5S Submersible Pump is a rugged, industrial grade performer engineered specifically to handle the toughest water garden and waste management applications. Constructed of heavy duty cast iron with a high efficiency air filled motor, this powerful 2 horsepower pump provides reliable, continuous duty service where ordinary single phase pumps often fall short. It is the ultimate choice for large scale pond filtration systems, heavy biological filters, and demanding commercial water features that require absolute dependable water movement.
Built to operate in challenging, debris heavy environments with minimal maintenance, this unit features a specialized cast iron vortex impeller layout with a 420 stainless steel shaft. This configuration delivers superior solids handling characteristics, effortlessly processing spherical solids up to 2 inches as well as stringy or fibrous materials without clogging. For comprehensive motor protection, it is equipped with industry leading Class E insulation, integrated thermal overload safeguards to prevent overheating from a locked rotor or under voltage conditions, and dual mechanical shaft seals consisting of silicon carbide on the lower seal and carbon ceramic on the upper seal. Proudly made in Japan, this severe duty pump includes stainless steel hardware and must remain fully submerged during operation.
Pump Performance (Flow Rate by Height)
To ensure proper water feature visualization, match your required pipe elevation (total dynamic head) against the Gallons Per Hour (GPH) output below:
| Operating Height (Feet of Head) | Water Flow Rate (GPH) |
| 5 Feet (Standard Elevation) | 15,900 GPH (265 GPM) |
| 10 Feet (Medium Elevation) | 13,800 GPH (230 GPM) |
| 15 Feet (High Elevation) | 11,700 GPH (195 GPM) |
| 20 Feet (Significant Elevation) | 10,200 GPH (170 GPM) |
| 25 Feet (Best Efficiency Point) | 8,100 GPH (135 GPM) |
| 37 Feet (Maximum Height) | 0 GPH (Shut-Off) |
Technical Specifications
| Specification | Value / Rating |
| Pump Model | 65CVC41.5S-2 |
| Motor Horsepower | 2 HP |
| Maximum Flow Rate | 15,900 GPH @ 5ft |
| Maximum Head Lift | 37 Feet |
| Recommended Best Efficiency Point | 25 Feet of Total Head Lift |
| Solids Handling Capacity | Up to 2 Inches |
| Discharge Connection | 3 Inch FPT |
| Maximum Current Draw | 10 Amps |
| Electrical Rating | 230V AC / 60 Hz |
| Power Cord Length | 32 Feet |
| Approximate Dimensions | 22.9 Inches H x 15.4 Inches W |
| Approximate Weight | 103 Lbs |
| Warranty Coverage | 1 Year Limited Manufacturer Warranty |
Product Documentation
Review additional operational specifications, installation procedures, and parts layouts directly from the manufacturer documentation below:
» Product Instruction Manual PDF
» ShinMaywa Product Specification Sheet PDF
» ShinMaywa Product Catalog PDF
