Product Details
- Item Number: REP-IMPMD100
- Brand Name: Tidal Wave
- Manufacturer: Atlantic Water Gardens
- Fits Pump Model: MD1000
- Includes the impeller fan with 6 blades, shaft, magnet and end bearings as one complete assembly
- Approximate dimensions: 5 1/2" Total length - Magnet is 7/8" Dia - Fan is 1 5/8" wide
FAQ:
Question: Will the impeller fix my pump?
Answer: Low flow or a pump that will not start can have more than one cause. Check for blockage before assuming that a new impeller will solve it.
Disconnect power before touching the pump or water, opening the pump, or cleaning any part. If the plug or outlet is wet, switch off its circuit first; do not handle the wet connection. Do not operate a pump with a damaged cord or plug.
For the Atlantic MD1000, keep power disconnected while cleaning the pre-filter and intake and inspecting the impeller. Follow the MD-series manual to remove the cover and rotor. Flush loose debris with clean water; use its brush-and-white-vinegar method for crusty deposits. Keep track of the shaft, washers and bushings. Control the magnetic rotor when reinserting it so it cannot snap in and break the ceramic shaft.
If a component is damaged, confirm the exact replacement with your dealer. The assembly contains separate parts; coming apart during cleaning is not, by itself, proof of failure.
Reassemble fully and submerge the pump completely before restarting. Do not power the pump with its impeller removed or use a loose impeller near an energized pump as a test. Stop immediately for unusual noise, excessive vibration or odor. If the problem persists, contact Atlantic or your dealer.
FAQ:
Question: Will removing the pump cover and/or impeller void the warranty?
Answer: No... Removing the pump cover and impeller is part of normal preventive maintenance and should be done every 6-12 months to keep your pump in perfect working order.
Actual Impeller may vary from photo
