Product Details
- Item Number: REP-IMPFP50
- Brand Name: Tidal Wave - Fountain Pump
- Manufacturer: Atlantic Water Gardens
- Fits Pump Model: FP500
- Includes the impeller fan with 6 blades, shaft, magnet and end bearings as one complete assembly
- Approximate dimensions: 3.336" Total length - Magnet is 0.756" Dia - Fan is 1.42" wide
FAQ:
Question: Will the impeller fix my pump?
Answer: Low flow or failure to start does not by itself prove that a new impeller is needed.
Disconnect power before touching the pump or water, opening the pump, or cleaning any part. If the plug or outlet is wet, switch off its circuit first; do not handle the wet connection. Do not operate a pump with a damaged cord or plug.
For the Atlantic FP500, leave power disconnected and wait for the motor to stop before checking the intake and clearing any blockage. Check the water level: this pump must operate fully submerged. Never put fingers or tools near the intake while the pump is running.
For any impeller removal, cleaning or reassembly, follow the FP-series manual for your exact model. Do not assume that another model's cover-removal method applies. Ask Atlantic or your dealer to confirm the correct replacement if you find damage or are unsure of the cause.
Reassemble completely and restore full submersion before restarting. Do not power the pump with its impeller removed or use a loose impeller near an energized pump as a test. If the problem continues, stop the pump and contact Atlantic or your dealer.
Question: Will this impeller fit my pump?
Answer: This impeller is ONLY designed to fit in the Atlantic Water Gardens brand pump which is model 500. This impeller will NOT fit any other pump. Please DON'T buy unless you have this exact model from Atlantic. Returns can be expensive and time consuming for everyone.
Question: Will removing the pump cover and/or impeller void the warranty?
Answer: No... Removing the pump cover and impeller is part of normal preventive maintenance and should be done every 6-12 months to keep your pump in perfect working order.
Actual Impeller may vary from photo
