The Electro Titanium Aquatic Pond Heater is the latest addition to our growing product range. Pure Titanium flow tube and elements ensure its suitability for use on all aquatic systems, including salt water / tropical marine. The decision to produce a Titanium heater was made for a number of reasons. With outstanding resistance to fatigue and erosion, Titanium has a low density, excellent strength and has super corrosion resistance. It is considered to be physiologically inert. This new heater is also suitable for some chemical applications. Call or e-mail us so we can determine if your application is suitable for this versatile heater.

All units (including Stainless Steel models) come fully equipped with Digital control for the precise all season temperature control demanded by professional fish keepers, breeders & hobbyists. Our highly sensitive flow switch, high limiting safety thermostat and integral contractor / relay are fitted as standard. The Titanium heaters are designed for safety and efficiency. They are easy to install with the option of water flow from either direction.


Key Features:

• 3kw (3000 Watts)
• 220 Volts AC (Requires special power - hard wiring by a licensed electrician may be required)
• All Titanium flow Tube (Suitable for Freshwater or Saltwater)
• Titanium heating element
• Digital Temperature Display & Control
• External Reversible Flow Switch - Allows the water to flow through either direction
• High Limiting Safety Thermostat
• 1-1/2" In and Out Slip Connections
• Approximate dimensions: 23" L x 6" W x 8.5" H
• Control thermostat 0ºF to 90ºF with 1ºF differential
• Minimum flow requirement: 600 GPH
• Maximum flow velocity: 2560 GPH
• Integral Contactor / Relay
• Circuit Protection Delay Switching
• Minimum Pipe Size: 1 1/4"
• Unit must be mounted to a firm base or wall
• Unit should be installed within a dry weatherproof enclosure
• See instructions for Amperage Requirement for this unit
• 1 Year limited manufacturer's warranty

Heater Operational Instructions

HTI - Pure Titanium Models
Model Number	KW	Volts	Phase	Amps	Length (in)	Width (in)	Height (in)	Bolt "on Center" Width (in)
HTI-1.5-115	1.5	115	1	13	23"	6"	8.5"	12.5"
HTI-2-115	2	115	1	17.4	23"	6"	8.5"	12.5"
HTI-2-220	2	220	1	9	23"	6"	8.5"	12.5"
HTI-3-220	3	220	1	13.6	23"	6"	8.5"	12.5"
HTI-4-220	4	220	1	18	23"	6"	8.5"	12.5"
HTI-6-220	6	220	1	27	23"	6"	8.5"	16.5"
HTI-6-220-3	6	220	3	24	27"	6"	8.5"	16.5"
HTI-8-220	8	220	1	36.4	27"	6"	8.5"	16.5"
HTI-8-220-3	8	220	3	33	27"	6"	8.5"	16.5"

FLOW RATE FOR ALL UNITS:     Minimum:  10gpm        Maximum: 43 gpm

Rule of thumb on pond heating: 1 Watt per Gallon = 10 degree rise in water temperature. Example 1500 watt (1.5 kw) to heat a 1000 gallon pond by 15 degrees over a 24 hour period.


Unit may vary from photo