Mix the desired dose with one gallon of pond
water and distribute evenly around the perimeter of the pond.
Add 1 teaspoonful (5 ml) for every 50 U.S. gallons (190 L) of pond water.
Water will clear within several hours.
If a second dose is necessary, wait 24 hours before applying. Filter pads
should be rinsed frequently when clearing pond water.
Accu-Clear can be used once a week to keep filters performing at maximum
efficiency.
Accu-Clear can be used in ponds and water gardens containing koi, goldfish,
and aquatic plants. Overdosing with Accu-Clear causes the product to work
more slowly.
Before using Accu-Clear, make certain that the pond has vigorous aeration,
(a fountain, waterfall or aeration device) especially during hot summer
months. In summer heat, pond water contains very little oxygen.
In sunlight, algae and submerged plants produce oxygen, and in some cases
may be the major source of oxygen in the pond. At night, however, submerged
plants and algae actually consume oxygen. Decomposing organic matter also
consumes oxygen, even after it is removed by the filter. Until the filter is
changed, decomposing organic matter may still cause the oxygen level to drop
to harmful levels if adequate aeration is not provided.
Therefore, when using Accu-Clear, especially during the warm summer months,
adequate aeration is required to keep oxygen levels healthy for your fish.
Do not shut off pond pumps or aeration devices at night! Aeration must be
provided to pond life at all times.
16 oz (480 ml) bottle treats 4,800 U.S. gallons (18,168 L)
32 oz (948 ml) bottle treats 9,600 U.S. gallons (36,340 L)
64 oz (1.9 L) bottle treats 19,200 U.S. gallons (72,672 L)
128 oz (3.8 L) bottle treats 37,854 U.S. gallons (143,293 L)
|